assembly through-line schematic for additional product information, plea s e visit www .twinind.com contact information: 925-866-8946 (phone) 925-866-8937 (fax) sales@twinind.com microamp MB-14 circuit board straight-through transmission line the microamp MB-14 circuit board is used for a straight-through connecton with the microamp mh series of connectorized housings. it can be used as an extension when designing multple board circuits with the mh-2 housing, thereby allowing a single board to be tested before adding a second one in cascade. the MB-14 can also be used to create custom passive networks by cutng the center trace and soldering components in series or shunt. boards are fabricated from a high-performance 13 mil thick ro-4350 laminate with rohs compatble enig platng (electroless nickel/immersion gold) on both the component side and the solid botom ground plane. the board measures 0.490" x 0.590" and mounts into the housing with four or eight #1-72 screws for optmal high frequency grounding. pads for the input/output rf connectors allow the sma center pins to be easily soldered to the board afer it is installed into the housing. ref size function j1 n/a rf port j2 n/a rf port ? use for traight-through connectons ? can also be used for custom passive networks ? ro-4350 board material ? fits microamp mh-series housings features
|
